Fibre optics or LED lights for a pool in Thailand: how they differ and what to choose

Underwater LED lamps light the main body of water and can be replaced or upgraded with the pool in use, while fibre-optic lighting carries light from one dry source outside the pool through optical fibres set into the finish, which needs a drained pool. Which to choose depends on how you use the pool after dark, the state of the existing fittings and whether the pool stays in water or is drained for renovation: LED lamps for a pool in use, fibre optics when the pool is drained for a new build or a finish renewal, and ultra-slim resin-filled surface lights in place of leaking or protruding fittings.

Guides and answers · Search all guides

How fibre-optic and LED pool lighting differ

LED lamps replace dim or failed underwater lamps, while fibre optics carry light from one dry source outside the pool to many small points in the surface. Lamp replacement can be done with the pool in use or the water lowered. Fitting fibre optics needs a drained pool.

Fibre-optic lighting is not LEDs set into the steps or floor. Instead, light is carried through optical fibres from one light source that sits dry outside the pool to many small points across the surface. Because the fibres are set into the finish itself, they create fine points of light along step edges, across starry floors, on feature walls, across a shallow standing or tanning ledge (a Baja shelf, which is a flat ledge rather than a sloped beach entry), or along outdoor garden paths and steps around the pool.

We replace dim or failed underwater lamps with white or colour-changing LED lamps. We replace leaking or protruding fittings with flat, ultra-slim resin-filled surface lights. Overhead or roof-mounted projectors can cast moving patterns onto shallow ledges, the main water surface or a stone wall.

  • White or colour-changing LED lamps: fitted to light the main water volume and keep steps clear after dark.
  • App-controlled lighting: operated from a phone app or a home automation system so you can switch, dim or change colours remotely.
  • Ultra-slim surface-mounted pool lights: flat, resin-filled fittings installed in place of bulky or leaking old underwater lights, leaving little for a hand or a foot to catch on.
  • Fibre-optic lighting: optical fibres fed from one dry light source outside the pool to create small points of light in steps, starry floors, feature walls, a Baja shelf (standing or tanning ledge) or garden paths.
  • Overhead and roof-mounted projection: projectors above the pool that cast moving patterns onto a shallow beach entry, a Baja shelf or tanning ledge, the main water surface or a stone wall.

What can be done with water in the pool vs a drained pool

Replacing dim or failed underwater lamps with white or colour-changing LED lamps, fitting app-controlled lighting and installing overhead projection can be done with the pool in use or with the water lowered. Our inspection confirms what suits your pool and how we protect the water and equipment while we work.

Fitting fibre optics needs a drained pool. Because the optical fibres are built into the surface, we install them in a drained pool during a new build or as part of a finish renewal. Pebble Pools installs and renovates PebbleCrete pool finishes in Thailand, and we install fibre-optic systems across Phuket and Thailand when laying a new PebbleCrete finish.

Where groundwater is high or the monsoon is on, we check the groundwater level and the timing before draining: an empty shell can be pushed up or cracked by water pressure from below, and a wet shell is hard to dry for the new finish.

Relocating underwater light fittings that shine straight towards a terrace or dining area also requires draining the pool, so it fits well into the same shutdown as a surface renewal. Replacing leaking or protruding lights with ultra-slim surface-mounted fittings needs either lowered water or a drained pool, which the inspection confirms. For a rental villa or a hotel, we plan the work around your bookings and agree the programme for the individual project.

Why we replace leaking or protruding lights rather than resealing them

In our experience, water most often escapes from a pool through the light fittings, because their cable conduits are frequently run through the shell instead of being brought up properly above water level. We do not reseal leaking light niches; we replace the leaking lights and correct faulty conduits.

We do not reseal leaking pool lights — we replace them. We fit ultra-slim, resin-filled surface-mounted lights that sit flat against the wall, and when a pool is stripped back for renovation we seal faulty old conduits and run new ones. A leaking pool wastes water, washes away water treatment and can undermine the terraces around it, so if the pool is losing water we investigate the leak before starting lighting or surface work.

  • Evaporation-versus-leak comparisons and water-level checks with the pump on and off
  • Testing in a filled pool with imported fluorescent leak-detection dye kits, where dye is added near suspected light fittings and traced with a special torch
  • Pressure testing of suction, return, jet and drain lines, so a leak in the pipework is not mistaken for a leaking light fitting
  • Checking the balance tank, overflow channel and pump room to see whether water is also escaping elsewhere
  • Replacing leaking or protruding underwater lights with ultra-slim resin-filled surface lights and correcting faulty light conduits

Inspection, cables and electrical work

Before recommending lighting changes, we inspect the existing lights, cables, transformers and controls, and check whether cables and conduits can be reused. Electrical work is agreed with the owner's electrician or engineer. We coordinate site access with your villa manager or hotel engineer and agree the programme for the individual project.

Before any fitting is opened, the lighting circuit is isolated, and your electrician checks the transformer, the earthing and the earth-leakage protection: a light fitting that has let water in is also an electrical fault, not only a leak.

Any engineering decisions are made with you and your engineer — or, if you don't have one, with our partner engineer.

When investigating water loss around light fittings, we do everything we can to find the cause by working through likely faults and testing them, though we cannot promise to find every leak without excavation or opening part of the structure. When a pool's history is unknown, not every hidden fault can be found at once, so repairs and restarts may proceed in stages.

How to choose what suits your pool

Choosing between LED lamps, ultra-slim surface lights, fibre optics and projection comes down to how you use the pool after dark, the state of the existing fittings and whether the pool is staying in water or being drained for renovation.

At Private Villa, Thepkrassatri — White Halo (see the cases below), we fitted new flat lights, fibre optics and projection as part of the pool extension and renovation.

  • Working housings with dim or failed bulbs, pool in use: fit new white or colour-changing LED lamps and add app-controlled switching if you want control from your phone or home automation system.
  • Bulky fittings that stick out from the wall, or niches that leak: replace them with flat, resin-filled ultra-slim surface lights rather than resealing the old fittings.
  • Pool being built from scratch or drained for a new PebbleCrete finish: install fibre-optic points in steps, starry floors, feature walls, a Baja shelf (standing or tanning ledge) or garden paths.
  • Lights glaring towards a terrace or dining area: relocate the fittings while the pool is drained for refinishing.
  • Shallow water or feature walls needing visual movement without draining: install overhead or roof-mounted projection aimed at a shallow beach entry, a Baja shelf or tanning ledge, the main water surface or a stone wall.

What to send us for a first discussion

Send daylight and after-dark photos of the pool, its lights and surrounding walls, plus photos of the transformers and controls. Include your location, approximate pool size and what you want changed. Tell us whether you plan a finish renewal and whether the pool is losing water.

  • Daylight and after-dark photos of the pool, the current lights and the surrounding walls
  • Photos of the light transformers and control switches in the pump room
  • Your location in Phuket or elsewhere in Thailand and the approximate pool size
  • What you want changed, and whether you also plan to renew the pool finish
  • If the pool is losing water, how much the water level drops with the pump on and off, and any damp patches or past repairs you have noticed

Further reading

Where we have done this

  • Private Villa, Thepkrassatri — White Halo — We extended and refinished the pool in PebbleCrete Supreme White Halo and PebbleCrete Glass Raindrop, and fitted new flat lights, fibre optics and projection alongside a reworked pump room and rebuilt balance tank.
  • Private Villa, Nai Yang — Atoll Pearl — Pebble Pools built this pool from scratch with a shallow ledge, a two-zone jacuzzi, air massage, a waterfall, fibre-optic lighting and a projection onto the water, finished in PebbleCrete Glass Atoll Pearl and PebbleCrete Supreme Turquoise Lagoon.
  • Private Residence, Bang Tao — pool stripped to the shell — Water had been leaking out through the light fittings along their cable conduits. We stripped the pool to the shell, sealed the old conduits, ran new conduits for the lights, fitted new pumps and refinished the pool in PebbleCrete Classic Aquamarine.
  • Private Villa, Naithon Beach — Royal Blue — We installed the projection while the pool was still tiled, and later took the tile off and relaid the pool in PebbleCrete Supreme Royal Blue with PebbleCrete Glass Nightfall Pearl on the coping, surround and entry ledge.

Questions we are asked

How does fibre-optic pool lighting differ from LEDs, and does it require draining?

Fibre optics are not LEDs set into the steps or floor. Light is carried through optical fibres from one dry light source outside the pool to many small points across steps, starry floors, feature walls or a shallow ledge (Baja shelf or tanning ledge). Fitting fibre optics needs a drained pool, so we install them during a new build or a finish renewal.

Do you reseal leaking underwater pool lights?

No, we do not reseal leaking pool lights — we replace them. In our experience, water most often escapes from a pool through the light fittings because their conduits are frequently run through the shell instead of being brought up properly above water level. We replace leaking or protruding lights with ultra-slim resin-filled surface lights and correct faulty conduits where needed.

Can we upgrade to LED or app-controlled lighting with the pool in use?

Yes. Lamp replacement, new white or colour-changing LED lamps, app-controlled lighting operated from a phone app or home automation system, and overhead projection can be done with the pool in use or with the water lowered. Replacing old fittings with ultra-slim surface-mounted lights needs either lowered water or a drained pool, which our inspection confirms.

How is the electrical work handled when pool lights are replaced or added?

We first inspect the existing lights, cables, transformers and controls to check what can be reused. Electrical work is agreed with the owner's electrician or engineer, and engineering decisions are made with you and your engineer — or, if you don't have one, with our partner engineer.

Fibre optics or LED lights for a pool in Thailand: which should we choose?

LED lamps if the housings are sound and the pool stays in use: they light the main body of water and can be replaced with the pool filled. Fibre optics if the pool is being built or drained for a new PebbleCrete finish: they give small points of light in steps, starry floors, feature walls or a Baja shelf. Leaking or protruding old fittings are replaced with ultra-slim resin-filled surface lights rather than resealed. The two can be combined: LED lamps for the main water and fibre optics on steps or a ledge.

Tell us where the pool is and what you want changed.

Send photos → discuss the work → site assessment if needed → quotation

Call 089 277 3314Email photos of your poolAdd us on LINE